High Power mode
 

High power mode allows you to reach the set room temperature incredibly quickly. A sharp drop or rise in the outdoor temperature affects both indoor temperature as well as the power of the air conditioner. To deactivate this function, you must press the button on the remote control again.

ECO mode
 

ECO mode makes it possible to reduce the energy consumed in both cooling and heating mode. When this option is activated in cooling mode, the set temperature increases by 1⁰C every 2 hours, and in heating mode - decreases by 1⁰C every 2 hours. ECO mode increases energy efficiency and reduces the consumption of electricity.

Temporary Operation
 

Temporary Operation function is activated with the Reset button on the indoor unit in cases when the remote controller is out of order or there are no batteries. When this mode is activated, the air conditioner fan speed automatically runs at a temperature of 25⁰C. The function is deactivated again by the Reset button.

Timer
 

Thanks to its built-in timer, you have the possibility to set the exact time for turning the air conditioner on or off when you are away. This function allows you to control the temperature depending on your individual preferences.

Automatic restart
 

The automatic restart function is additionally activated by a long press on the RESET button on the front panel and allows that the air conditioner turns on, running with the last settings after a sudden outage and then subsequent restoration of power supply.

Self-cleaning function in cooling mode
 

The self-cleaning function is activated after turning off the air conditioner and lasts for 30 minutes. When the air conditioner is stopped, the indoor fan turns on so as to dry the moisture in the heat exchanger, after which it turns off automatically. In addition to preventing the formation of mould in the indoor unit, this feature also removes bacteria that remain after the air conditioner is turned off by using low-density ozone.

One Touch mode
 

One touch mode allows you to save the temperature, fan power and air flow direction you prefer and use them whenever you need with a single press on the button “one touch”.

Comfort Sleep Mode
 

When Comfort Sleep mode is activated, the airflow is controlled and switched off automatically, with the option to set the air conditioner to switch off after 1, 3, 5 or 9 hours. During cooling, the set temperature rises automatically by 1⁰C every 2 hours, and in heating mode it decreases at the same rate. This feature increases energy efficiency and reduces power consumption.

Controlling two air conditioners simultaneously
 

This mode enables you to independently control 2 ACs, installed close to each other with one remote controller.

Air purification mode
 

This function gives you the possibility to purify and ionize the air which ensures a clean and fresh environment in the room. Impure air is cleaned and ionized by a plasma ion generator.

Power change
 

This function allows you to lower the power by 70 or 50 % so as to avoid power failures in the electricity supply, when other devices are connected to the electric network. The lower the power, the more the saving, which enlarges the compressor service life.

Operating mode at a temperature of 8⁰C
 

This function monitors the room temperature and automatically switches to heating mode when it drops below 8⁰C. This will prevent the pipes from freezing, as well as possible flooding or other damage caused by frost.

Plasma filter
 

Plasma purification filter removes harmful particles, neutralizes unpleasant odours and prevents growth of bacteria, viruses, microbes, allergens and others, providing a constant supply of clean and ionized air.