Adaptive predictive control
The air conditioner automatically determines the operating mode and temperature settings based on an approximate calculation and adjusts the frequency inverter.

Economy mode

The air conditioner works in energy saving mode, thus maintaining a comfortable operation of cooling or heating.

Jet technology

Aircraft technology is used in the airflow system of the air conditioner.

Automatic air distribution valves
Regardless of the operating mode, the AC automatically chooses the best angle.

Saving the position of the valves
While moving, the valves can be stopped in the desired angle.

Turning the air distribution valves into a vertical position
The AC valves can be placed into the desired position which varies from horizontal to vertical.

Self-cleaning function
The system suppresses the influence of the allergen detected and caught by the filter by means of controlling temperature and humidity.

Drying mode
The device dries the room by means of periodical drying operations.

"Hi Power" mode

The AC can work in "Hi Power" mode for 15 minutes. This mode is suitable for quick achievement of the desired temperature.

24 hour timer
Using the combination of start and stop timer, you can use two operations of the timer per day. Once set, timers will start and stop the system in the set hour.

„Sleep” mode
The temperature in the room is automatically controlled in sleep mode which ensures the temperature does not go up or down too much.

On/Off timer

The AC will automatically start and stop in the set time.

Comfortable start
In ON-TIMER mode, the AC automatically starts working a little earlier so that the set temperature in the room gets optimal on time.

Microcomputer defrosting
This mode automatically removes accumulated frost and helps reducing the time for defrosting.

Self-diagnosis function
In case the AC is not functioning well, an inside microprocessor automatically starts performing a self-diagnosis. The error is presented as a two digit indication.

Automatic function for restart
The compensation in case of power failure is a function which saves the working status of the AC immediately before its turning off due to power outage and automatically continues operating from this moment when the power is restored.